
-
WoodUbend mouldings have all the properties of wood.
-
Once heated up can be moulded to any contour.
-
A hairdryer will do.
-
They can be drilled, sanded, glued, painted, stained, varnished or distressed And will adhere to most surfaces, contoured or flat.
-
WoodUbend can be cut with a craft knife or scissors.
Application
-
Make sure the surface to are applying to is free from flaking paint or dirt.
-
Warm up the moulding before applying the glue.
-
You will then be able to place and bend the piece to fit.
-
Heat can be applied multiple times.
-
Apply a good quality wood glue to the underneath of the moulding and push into place.
-
Hold in place for for a couple of minutes, use heat again if needed - this will also help with the bonding process
-
Wipe off excess glue with a damp cloth.
-
And now you are ready to Paint !