woodubend logo.png

WoodUbend mouldings have all the properties of wood.

 Once heated up can be moulded to any contour.

A hairdryer will do.

They can be drilled, sanded, glued, painted, stained, varnished or distressed And will adhere to most surfaces, contoured or flat.

WoodUbend can be cut with a craft knife or scissors. 


 Make sure the surface to are applying to is free from flaking paint or dirt.

Warm up the moulding before applying the glue.

You will then be able to place and bend the piece to fit.

Heat can be applied multiple times.

Apply a good quality wood glue to the underneath of the moulding and push into place.

Hold in place for for a couple of minutes, use heat again if needed - this will also help with the bonding process

Wipe off excess glue with a damp cloth.

And now you are ready to Paint !